ACSion II Stereo HD Camera

      Applied Color Science is pleased to announce the development of a new line of  HD digital imaging products - the ACSion II series. Building on our success with the

ACSion I series of HD camera modules, we have expanded the image capture, storage, and I/O capabilities of these devices while retaining the flexibility of the ACSion I architecture.

 As a first offering from this new line, we have developed a stereo HD camera module with 2 independent sensor heads. The ACSion II stereo HD camera incorporates functions

 and features that are found on high end digital cinema cameras (eg., 12-bit RAW output, custom LUTs) at a fraction of the cost. Our proprietary dual sensor control and image processing

electronics allow us to keep the sensor head small (80mm X 55mm X 25mm) and the power consumption low (<5 watts at 60Hz frame rate). See the table below for a list of features.

Image Sensor Format

2560 X 1944 (5Mpixels) - Bayer RGB (each sensor)

Optical Format

1/2.5"

Lens Format

C-mount (w/back focus adjust)

Video Modes supported

720p/60Hz; 1080p/30Hz; Full Res/15Hz

Genlock operation

Yes

Video output formats

CameraLink(RAW or RGB), (GiGe - 3Q2009)

Bit depth

12 bits/pixel (RAW)/ 8bits/pixel (RGB)

Camera Control Port

mini-USB/ USB2.0

Control Functions

Sensor gain, exposure, Gamma LUT, Offset

On-board SDRAM

32Mbyte (expandable to 64Mbyte)

Embedded Image Processing

De-Bayer, AGC, Color Correction

Power Consumption

~5watts / 5.0V DC

Dimensions

Sensor Heads:80mm X 55mm X 25mm (excl. Lens)

Video Processing Unit: 130mm X 65mm X 43mm

Each sensor head connected to VPU via  100mm flex cable

Additional Features

Still Frame Capture/Upload available thru USB port

For pricing and additional information, contact Applied Color Science:

 (949)218-0605

e-mail: mwhalen@appliedcolorscience.com